Blog

Making Wire Links in Beading

 |  | No Comments

By using either a regular loop or a wrapped loop, you can make interesting accessories made from wire links. Each link can be decorated with beads or even precious gems. Different-colored beads can be paired with many types of wire links. The number of links to be used primarily depends on the accessory's intended design.

To make sturdy wire links, a considerable amount of skill in wire working is required. Beading enthusiasts must learn how to properly bend and twist beading wire to create reliable links. Here are some easy-to-follow steps in creating links from beading wire.

Steps in beading wire links

If you're making wire links for the first time, it's always a good idea to start with larger loops because these are easier to work with. Knowing how to make wire loops is a prerequisite to making wire links.

1. To make the links, cut a length of beading wire into short pieces. Each piece of wire will be formed into one link, so the number of pieces you cut must be equal to the number of wire links you want to make.

2. Make a loop in each piece of wire, with each loop measuring around five millimeters in diameter. You can also make loops with diameters that are smaller than the diameters of the beads you're going to use.

3. To make even loops, use the same area on the pliers' nose when bending the pieces of wire. For convenience, you can mark the part of the pliers' nose that you will be using to make the loops. The mark will serve as a guide in creating consistently sized loops.

4. Once the first loop is created, insert a bead into the loop then start making another loop with another piece of wire.

5. To add another link, insert another piece of wire into the loop and make a loop from it. Repeat the same process until you have the desired number of links.

6. To finish the accessory, use a clasp or a jump ring as a locking mechanism.

Tips on making wire links for beading

1. When working with fragile beads such as those made from clay or stone, make sure to leave a little space between the loop and the bead. This will prevent the bead from breaking or cracking when the loop around it tightened.

2. When making a wrapped loop, use a longer piece of wire. This can help you make a sturdier loop.

3. To make sure that the bead is centered and that the wire is evenly wrapped, you should first slide the bead onto the center of the wire piece and make a loop before wrapping both ends of the wire. To make a consistent number of wraps, wrap each side once, working on alternating sides until you get an even number of wraps.

Lastly - make sure your click this link and signup on the next page so I can send you our thirty-day complimentary beading mini-course. Click Here Now.

Happy Beading,

-Tracy Miller

P.S. Make sure you click here now and get access to the free videos and thirty day training course we have created for you that will show you great techniques for beading jewelry.

Categories: Beading Lessons, Beading Projects
Tags: , , , ,

Leave a Comment

Your email address will not be published. Required fields are marked *

*

Learn To Create Your Own Jewelry

Check Our Our FREE DVD!

  • Follw Me On Twitter

    Error: Twitter did not respond. Please wait a few minutes and refresh this page.